As an Amazon affiliate, we earn a commision from qualifying purchases.
This article will help you fix Samsung front load washer problems spin cycle.
Picture this: you’ve loaded your front load Samsung washer with dirty clothes, pressed the start button and left the machine to do its work. But, upon coming back, you find out that the spin cycle is not working.
It’s a frustrating experience that can leave you with wet, soggy clothes and a headache.
But, don’t worry, you’re not alone. Many Samsung front load washer owners have experienced the same problem.
In this article, we will provide you with some helpful tips and tricks to fix the issue.
Samsung front load washer problems spin cycle
To make pinpointing the exact cause easier, it is important that you note other symptoms the washer might be exhibiting.
For instance, does it drain? Does it display an error code? Or does it spin albeit slowly? Does it spin though still leaves the clothes wet?
We shall use these symptoms to get to the root cause of your front load washer having spin cycle problems.
Samsung front load washer not spinning or draining / Samsung front load washer won’t spin or drain
If your Samsung washer neither spins nor drains, it is an indication that something is wrong with the drainage system.
Having said that, if the washer is new or was recently installed, first confirm that the drain hose was properly installed.
Typically, the drainage hose should not be more than 96” high.
So, confirm that yours is below this level.
Tip: these requirements are different if you are using a sink. For sinks, the drain hose should be at least 24” high and no more than 35”.
If your drain hose is inserted into a drain pipe, confirm that the hose is inserted at least 6” and no more than 8” into the pipe.
While still on the drain hose, also inspect it for kinks – if it has kinks, be sure to straighten them out.
Next, disconnect the drain hose to see if it has clogs.
If there are clogs inside the hose, be sure to remove them – you can use a vacuum cleaner to suction them out.
Also, it could be that the drain pump filter (also known as the debris filter) is fully clogged.
The drain pump filter’s main job is to trap lint, coins and other debris from your clothes during drainage.
Over time, this filter will clog fully thereby preventing drainage.
That being so, remove the drain pump filter and remove any trapped debris inside it.
Additional solutions
Finally, test the drain pump as it could be faulty.
Here’s the thing…
If the drain pump is faulty, it will not pump water out of the unit and this will result in the drainage problem you are experiencing.
The video below will guide you on how to go about testing the drain pump.
Now, if the pump is faulty, we recommend you get an OEM drain pump replacement for Samsung front load washers.
Samsung front load washer not spinning fast enough / Samsung front load washer won’t spin fast
To kick us off, it is likely that you have selected the wrong wash cycle for your clothes.
For instance, selecting the delicates cycle while washing jeans or comforters, will result in a slow cycle.
Having said that, first confirm that you have selected the right cycle for your load.
If you note you are using the wrong cycle, simply stop the current cycle, select the correct cycle and press the start button.
Other than that, confirm that you are not overloading your washer.
Here’s the thing…
Overloading the washer puts excess weight on the drum bearings and this will result in slower-than-normal spin speeds.
Press the pause button and give the washer a few minutes to drain.
Follow this by reducing the load size inside your washer.
Typically, do not load the washer more than ¾-way.
Final solution
If you have tried the above steps to no avail, it is likely that the bearings are worn out.
Mostly, when the bearings wear out, the washer will make loud noises during the spin cycle.
That being said, open up the washer and inspect the bearings.
If they are worn out, be sure to replace them.
Samsung front load washer not spinning clothes dry
Again, start by confirming that you have selected the correct wash cycle.
Other than that, also confirm that you are not overloading your washer.
Finally, it could be that your washer is not spinning fast enough.
That being so, check out the steps we have just covered above under Samsung front load washer not spinning fast enough for more solutions.
Samsung front load washer won’t finish spin cycle
If your Samsung washer spins for some minutes before it stops spinning and won’t proceed, start by re-balancing the load.
Also, make sure that you are not overloading the washer – at most, you should load it ¾ way.
Other than that, it could be that the door lock assembly is faulty.
Here’s how it affects spinning…
During tumbling, the clothes will knock the door open and this will stop the wash cycle.
So, be sure to test the door lock assembly for continuity.
The lock should have continuity when the door is locked and no continuity when the door is open.
If your door lock assembly fails this test, replacing it is the way to go.
Here, we recommend Samsung’s OEM door lock assembly.
Moving on…
It is also likely that the timer is faulty.
This would result in the washer not advancing from one cycle to the next or the time not counting down as it should.
Bearing that in mind, test the timer for continuity.
If it lacks continuity, you should get a replacement timer.
Samsung front load washer problems spin cycle – further troubleshooting
Samsung front load washer not spinning / Samsung front load washer spin cycle not working / Samsung front load washing machine not spinning / Samsung front load washer won’t spin
Here, we shall start with the most common reasons and work our way down.
So, does the washer display DC, Ub or Ur?
If yes, either your washer is not well leveled or the load inside it is not well balanced.
Tip: this is the most common reason for brand-new Samsung washers not spinning.
Consequently, press the pause button and give the washer a few minutes for it to drain.
Follow this by opening the washer door and balancing the load.
If the code is still displayed, inspect the washer and confirm that you are adhering to Samsung’s washer leveling instructions.
More solutions
If your washer displays either a 4c or 4e error code, it means that it is experiencing water issues.
To be more specific, the washer is getting little or no water.
In turn, the washer will be unable to kick off the spin cycle.
Bearing that in mind, start by confirming that both the hot and cold water faucets are both open.
Next, check for kinks along the water inlet hose – if you spot any, be sure to straighten them out.
While still on the water hose, also check for leakages along them.
If you find any leaking spot, you can either seal the spot or get a replacement hose for Samsung washers.
Next, take out the mesh filters.
Usually, there are two mesh filters – one for the hot water hose and the other for the cold water hose.
Tip: if you are having difficulties removing the filters, you can use pliers to pull them out.
Once you have taken out the filter, use a toothbrush to scrub it under running water.
So, what is the essence of doing this?
Here’s the thing…
The mesh filter might have clogs more so if you live in areas with hard water and this will reduce the amount of water flowing into the washing machine.
Next, confirm that the water pressure to the washer is within the required range.
Samsung recommends that you have a water pressure of between 20 and 116 psi for your Samsung washer to function well.
So, confirm that your pressure is within this range.
Samsung front load washer not spinning – additional solutions
If the above steps do not fix the washer, it is time to open up the washer as the problem could be a mechanical one.
Start by inspecting the spider arms – are they damaged or corroded?
Tip: typically, bad spider arms will make loud grinding noises as the washer spins.
If the arms are damaged, you can easily get OEM replacement spider arms from Samsung.
Next, inspect the drive belt as it could have worked itself loose or snapped.
In case the belt is loose, simply tighten it using the idler pulley.
On the other hand, if it is snapped, getting a Samsung frontload washer belt replacement is your only option.
The other component that could be the culprit is a bad idler pulley – remember that it holds the belt in place.
If the pulley snaps, the washer will not spin and as a result, you will have to replace the idler pulley – bear in mind that in some models, it comes attached to the motor assembly hence you will need to replace the whole motor assembly.
Samsung front load washer not spinning – final solution
If you have checked everything we have covered above to no avail, the motor has likely failed.
Once more, if this is the case, you should replace the motor for the washer to resume spinning.
Samsung front load washer not spinning properly / Samsung front load washer not spinning correctly
Again, this might be from several factors such as an unbalanced load, low water pressure, clogged filters and so on.
Bearing that in mind, the steps we have covered above will guide you on how to fix your front load Samsung washer when it is not spinning correctly.
Samsung front load washer problems spin cycle – frequently asked questions (FAQs)
How do I fix my Samsung front load washer that won’t spin? / How do I fix the spin cycle on my Samsung washer?
The first step is to identify the root of the problem.
This is made easier by the codes displayed on the screen or other symptoms such as the washer not draining or not filling with water.
Having said that, the above steps will guide you in pinpointing the cause and fixing it.
So, be sure to follow them.
Why won’t my Samsung front load washer spin?
This such as a clogged drain filter, a faulty drain pump, a clogged mesh filter, low water pressure and so on.
Above, we have outlined how to single out the cause, troubleshoot and fix it.
So, be sure to follow the steps above to fix your Samsung washer.
Samsung front load washer problems spin cycle – final words
As we have seen, some spinning cycle problems are as a result of with selecting the wrong wash cycle.
Therefore, if you are unsure of which cycle to use, be sure to confirm from your owner’s manual which cycle is appropriate for your laundry.
